Introduction:

The production of  GlObe Star "W" type safe power rails is the results of a technological breakthrough.


Being specialized in hoist repair and related engineering innovation, we provide our customers with excellent services backed up by persistent devotion, responsibility and advanced technology. In order to overcome the difficulties that we have been confronted with during parts importing, we are delicating ourselves to the production and innovation of parts and components. Also, we have obtained numerous patents approved either by the ROC or overseas countries. We supply our customers with readily available engineering materials and technical assistance to shorten your preparation time.  

 

Power Rails

Knowing the Germany has been using safe power rails since 1912 and bare conductor simply doesn't guarantee safety, we began to research, develop, and then mass produce 60-150 amp continuous rails, and have been highly recommended by our business partners.

 

We discovered that there are no high amperage power rails available on market, so we began to produce "W" type power rails with reference to German-made units.

 

With support and affirmation from our customer, we will continue our research and development work, offering our clients safe and automated engineering services.

 

Quanlity is a basic requirment for GlObe Star products.

 

Features: 

 

Conductor

Made of aluminum and edged with stainless steel, the surface of this unit is erosion-resistant, and will not become oxidized. Can be used in a damp environment, ensuring good connection and durability.

With a "Λ" type contact surface, the brush can automatically correct its way as it moves forward on the rail. This type of surface maintains close contact, ensuring better electrical conduction. The lead angle of the conductor prevents the collector mount from tripping-out, enabling it to move more smoothly.

Connector

The connectors are featured with a reverse U-shaped guider design, strengthening the extension guiding of power rails. They stabilize the connection of the power rail conductors and avoid defective contact and voltage drop issues of the traditional 8-shaped connectors. The power rails are designed and improved with reference to equivalent German products, and they outperform similar products in the market.

Hanger Clamp

The hanger clamps are integrally formed with nylon resin, and can be easily installed by press bonding without use of screws.

Current collector

The two-armed current collectors are made of nylon resin with reinforced springs. Their structure is well designed for high performance and durability.

Carbon brush

The carbon brushes are well fabricated with materials from Japan and Germany, and undergoes laborious powder metallurgy and refinery process. Their conductivity and durability are outstanding.

Performance

w-type-power-rail-p4--1w-type-power-rail-p4--2

▲ 800A                                                                            ▲ 800A

 w-type-power-rail-p4--3w-type-power-rail-p4--4

▲ 500A                                                                            ▲ 320A

 w-type-power-rail-p4--5w-type-power-rail-p4--6

 ▲ 320A                                                                           ▲ 800A

 w-type-power-rail-p4--7w-type-power-rail-p4--8

▲ 320A / 500A                                                                 ▲ 320A 

     ※W型電軌工程實績用於台船、中鋼、台電、台灣車輛、台塑關係企業等。

General technical information

A. 交流三項發電機之全載電流表 Motor nominal currents

w-type-power-rail-p5-1

 

註:

1. 額定電壓為208V及200V者,可讓220V之相當值各增加百分之6及10的負載。

2. ※如功率因數為0.9及0.8者,左表有關數值應分別乘以 1.1及1.25倍。

3. 極數超過6極,及起動轉矩特別大者其全載電流大於本表支標準值 ,以據銘牌支標示值為準。

4. 採錄自電工法規P.514。  

 

B. 相關技術資料較繁多,請來電再行寄上,謝謝。

C. 負載曲線 Current-carrying diagram for different duty cycle

w-type-power-rail-p5-2

 

w-type-power-rail-p6-1-1

w-type-power-rail-p6-2-1

w-type-power-rail-p6-3

w-type-power-rail-p6-4

w-type-power-rail-p7-1

w-type-power-rail-p7-2

備註: W500、W800入電位置不同時,再行調整用量

W型320A零件圖

w-type-power-rail-p8-0

1. 電軌本體 Insulated Conductor Rail   KY-AW2030 (Copper inlaid)

                                                        KY-AW2032 (Stainless steel inlaid)

 w-type-power-rail-p8-1

2. 電軌夾 Hanger Clamp  KY-AW2100

 w-type-power-rail-p8-2

3. 末端蓋 End Cap  KY-AW2200

w-type-power-rail-p8-3 

4. 接頭 Connector   KY-AW2300

 w-type-power-rail-p8-4

5. 接頭蓋 Connector Cover  KY-AW2400

 w-type-power-rail-p8-5

6. 電源接頭蓋 Power Feed Cover  KY-AW2500

 w-type-power-rail-p8-6

7. 定位夾 Anchor Clamp  KY-AW2300

 w-type-power-rail-p8-7

9. 雙臂集電架 Current Collector  KY-AW2706

                                                   KY-AW2710

 w-type-power-rail-p8-9

10. 絕緣棒 Towing Arm  KY-AN1838 (380m/ml)

                                      KY-AN1850 (500m/ml)

w-type-power-rail-p8-10

W型320A施工圖

w-type-power-rail-p10-1

1. Construction Design

  • If you don't want to drill holes on the hanger, there is a Ctrack available for you to cut off to get a portion. Attach the nut and tighten the hexagonal set, then you may fasten the thing.

 w-type-power-rail-p10-2

A、立式施工圖 Vertical

w-type-power-rail-p10-3

B、側式施工圖 Side

2. Hanger Clamp Installation Diagram

  • Insert the power rail into the opening of the hanger clamp in an obliqueness of 30 degrees, then the power rail can be hold by the clamp.

w-type-power-rail-p10-4

3. Connector Cover and Power Feed Cover Installation Diagram

  •  Connector cover: Open the cover, hook the scoop slot from bottom to top in 30 degrees and combine them together.
  •  Power feed cover: loosen the plastic nut, take the plastic cap off and cut it for a proper aperture for piercing through the transmission line, tighten it, then close the cover.

 w-type-power-rail-p10-5密合嵌入

4. Connector Installation Diagram

  • Loosen the loose-resistant nut on the joint, plug it to the scoop slot on top of power rail conductor according to the "" type guide base, then tighten the two units together.

 w-type-power-rail-p10-6

5. Anchor Clamp Installation Diagram

  •  The positioning clamp is for tightening from inside and outside the power rail clamp for each power rail circuit to protect the power rail from moving in between the power rail clamps.

 

6. End cap Installation Diagram

  • Insert the end cap to the end of the power rail conductor. Knock twice will be OK. The end of the power rail conductor should be 35mm longer than the insulating plastics.
  • There should be one at each individual.

 

 w-type-power-rail-p10-7 

7. Towing Arm and Current collector Installation Diagram 

  • Put the collector parallelly with the power rail, and fasten it on the insulating rod.

W型500A零件圖 (停產,只提供舊客戶更換零件)

 w-type-power-rail-p12-0

1. 電軌本體 Insulated Conductor Rail  KY-AW5050

 w-type-power-rail-p12-1

2. 電軌夾 Hanger Clamp  KY-AW5100

 w-type-power-rail-p12-2

3. 接頭 Connector  KY-AW5300

 w-type-power-rail-p12-3

4. 接頭蓋 Connector Cover  KY-AW5400

w-type-power-rail-p12-4 

5. 定位夾  Anchor Clamp  KY-AW5600

w-type-power-rail-p12-5 

6. 末端電源接頭  Power Feed Connector  KY-AW5301

w-type-power-rail-p12-6 

7. 末端電源蓋 Power Feed Cover  KY-AW5500

 w-type-power-rail-p12-7

8. 雙臂集電架 Current Collector  200A KY-AW2720

w-type-power-rail-p12-8 

9. 絕緣棒 Towing Arm  AN1838 (380m/ml)

                                 AN1850 (500m/ml)

w-type-power-rail-p12-9

 

W型600A零件圖 

w-type-power-rail-p14-0

1. 電軌本體  Insulated Conductor Rail  KY-AW6060

w-type-power-rail-p14-1

2. 電軌夾  Hanger Clamp  KY-AW6100

w-type-power-rail-p14-2

3. 接頭  Connector  KY-AW6300

w-type-power-rail-p14-3

4. 接頭蓋 Connector Cover  KY-AW6400

w-type-power-rail-p14-4

5. 定位夾  Anchor Clamp  KY-AW6600

w-type-power-rail-p14-5

6. 電源蓋 Power Feed Cover  KY-AW6500 

w-type-power-rail-p14-6

7. 雙臂集電架 Current Collector  200A KY-AW2720

w-type-power-rail-p14-7

8. 末端蓋 End Cap  KY-AW6700

w-type-power-rail-p14-8

 

W型800A零件圖 

w-type-power-rail-p16-0

1. 電軌本體 Insulated Conductor Rail  KY-AW8080

w-type-power-rail-p16-1

2. 電軌夾 Hanger Clamp  KY-AW8100

w-type-power-rail-p16-2

3. 接頭  Connector  KY-AW8300

w-type-power-rail-p16-3

4. 接頭蓋  Connector Cover  KY-AW8400

w-type-power-rail-p16-4

5. 定位夾 Anchor Clamp  KY-AW8600

w-type-power-rail-p16-5

6. 電源接頭 Power Connector (Share with connector 與接頭共用) 

7. 電源蓋 Power Feed Cover (Share with power feed cover 與電源蓋共用)

8. 雙臂集電架  Current Collector 250A KY-AW2725

w-type-power-rail-p16-8

9. 絕緣棒 Towing Arm AN1850 (500m/ml)

w-type-power-rail-p16-9

10. 末端蓋 End Cap  KY-AW8700

w-type-power-rail-p16-10 

 

 

W型850A零件圖 

w-type-power-rail-p18-0

1. 電軌本體 Insulated Conductor Rail  KY-AW8080

w-type-power-rail-p18-1

2. 電軌夾 Hanger Clamp  KY-AW8100

w-type-power-rail-p18-2

3. 接頭 Connector  KY-AW8300

w-type-power-rail-p18-3

4. 接頭蓋 Connector Cover  KY-AW8400

w-type-power-rail-p18-4

5. 定位夾  Anchor Clamp  KY-AW8600

w-type-power-rail-p18-5

6. 電源接頭 Power Connector (Share with connector 與接頭共用) 

7. 電源蓋 Power Feed Cover (Share with power feed cover 與電源蓋共用)

8. 雙臂集電架 Current Collector  250A KY-AW2725

w-type-power-rail-p18-8

9. 絕緣棒 Towing Arm  AN1850 (500m/ml)

w-type-power-rail-p18-9

10. 末端蓋  End Cap  KY-AW8700

w-type-power-rail-p18-10

 w-type-power-rail-p20-1w-type-power-rail-p20-2

 W800A                                                                      W320A

w-type-power-rail-p20-3w-type-power-rail-p20-4

 W320A                                                                      W320A 

 w-type-power-rail-p20-5w-type-power-rail-p20-6

W500A/W320A                                                           W320A 

※W型電軌工程實績用於台船、中鋼、台電、台灣車輛、台塑關係企業等。